CNC Machined Aluminum Heat Sink for New Energy Equipment

CNCTAL manufactured this custom large-format aluminum heat sink for a new energy equipment application. Measuring 600 × 800 mm, the component features deep cooling fin channels reaching 120 mm. The 100-piece production batch required careful CNC milling process planning to minimize vibration and chatter during deep-slot machining.

Material Aluminum Alloy
Quantity 100 Pieces
Machining Process CNC Milling
Application New Energy Equipment
Request a Similar Part Quote
Large CNC machined aluminum heat sink with deep cooling fins and milled mounting features for new energy equipment
Actual CNC Machined Component
Machining Approach

Machining Challenges & Process Control

Manufacturing this large aluminum heat sink presents several CNC milling challenges. The 600 × 800 mm component combines deep 120 mm cooling channels with closely spaced fins, making workholding stability, vibration control and repeatable production important considerations.

01

Large-Part Workholding

The 600 × 800 mm aluminum component requires stable support during milling. Uneven clamping or insufficient support can introduce distortion and vibration. A suitable fixture arrangement should distribute clamping forces while maintaining access to the cooling channels and mounting features.

02

120 mm Deep-Slot Milling

Machining cooling channels up to 120 mm deep creates a significant risk of tool deflection and chatter. Long tool reach, chip evacuation and cutting forces must be considered carefully. Suitable tooling, controlled cutting engagement and appropriate machining parameters help reduce vibration during deep-slot milling.

03

Thin Cooling Fin Stability

The closely spaced aluminum cooling fins become less rigid as material is removed between the channels. Excessive cutting forces can cause fin deflection, chatter marks or local deformation. A carefully planned machining sequence and controlled finishing passes help protect these delicate features.

04

100-Piece Batch Consistency

Producing 100 large aluminum heat sinks requires repeatable setups and consistent machining conditions. Tool wear, fixture positioning and dimensional variation should be monitored throughout the batch. Inspection planning should focus on critical dimensions, cooling channel geometry and mounting features defined in the drawing.

Manufacturing Focus: Stability During Deep Milling

The main technical consideration in this project is controlling vibration while milling the 120 mm deep cooling channels. Stable workholding, suitable tool reach, controlled material removal and a well-planned machining sequence are important for maintaining fin geometry and surface consistency. For the 100-piece production batch, machining and inspection requirements should follow the approved engineering drawings.

  • Home
Scroll to Top